SE-002 Industrial Grade Flow Leak Detector
- The leakage rate of detection can reach 0.01 sccm, supporting -60KPa ~ 3.5MPa wide range pressure test range
- Perfect compatibility with domestic PLC, machine knife, upper biter, coder, automatic sorting equipment
- A 10.1-inch touchscreen with 20,000 test data storage;256 sets of channel parameters
- Low detection errors, high stability, low maintenance costs;Support non-standard customization
- Compatibility with differential pressure and direct pressure detection modes;One machine, free to switch manual / automatic detection modes
It is used in large containers, hydraulic valves, waterproof and breathable components, medical device pipelines, medical consumables, precision valves, new energy water cooling pipelines and other scenarios, and is a high-demand seal detection scenario such as flow characteristics detection, large volume workpiece.
General specifications
| Power supply | DC24V |
|---|
| Dimensions | 429 mm × 324mm × 255mm |
|---|
| Weight | 10 kg |
|---|
| Environmental temperature | use temperature is 5 ~ 40 ° C;The storage temperature is - 20 ~ 70 ° C |
|---|
| Humidity | below 80% RH, no condensation |
|---|
Technical specifications
| Display units | test pressure kPa, kg / cm2, psi, bar; Leakage mL / min, L / min |
|---|
| Flow test range | 0 ~ 100ml / min |
|---|
| Flow Display Accuracy | Standard: 0.001 ml / min Flow Sensor Repeatability Accuracy: ± 1% F.S |
|---|
| Direct pressure display range | Standard: 0 ~ 30KPa |
|---|
| Sensor range | Standard: 0-100 mL / min |
|---|
| Sensor pressure resistance | 3.0 times range |
|---|
| Leakage display | L / min, ml / min |
|---|
| Time Set | 0 ~ 9999 Seconds |
|---|
Configuration
| Hardware | 64 bitCPU |
|---|
| Number of parameter channels | 256 control IOs |
|---|
| Interface | 4 relay relay output |
|---|
